Marmitek 25 Guía de usuario

Marmitek X-10ABX1Gebruiksaanwijzing 5 User Guide 19

English6. Repeat this procedure from step 1 for the other equipmentyou want to control (VCR, DVD, SAT,...). If your equipment(TV, SAT, etc...) does n

per second). When the device responds, you can press CHAN+ (5) to switch to slow search (1 code per 3 seconds). You can step back by pressing CHAN- (5

EnglishNotes: • Execute a Master Clear before you start learning (see themethod above). • Make sure both remote controls have full batteries beforeyou

long as you would when using the original remote control. 7. Repeat steps 5 and 6 for every button you want to learn. 8. When you have finished learni

English4.8 Default Volume Control for satellite In factory default, in Satellite mode the volume is controlled by the TV. However, some Satellite tune

interface). This is ideal for Home Theatre applications. Askyour supplier for more information. Clearing a macro button 1. Press the SETUP (8) button

CopyrightsMarmitek is a trademark of Pattitude B.V., ABX1™ is a trademark of Marmitek B.V.All rights reserved. Copyright and all other proprietary rig

3ABX1 Learning RF Universal Remote 8in1 Button layout 231322446857911151317 - 22252610161412

General Security Note Attention: For carefree and safe use of this product, please read this manual and safety information carefully and follow the in

EnglishQuick start guide 1) Put the batteries in 1. Open the cover on the back of the 8 in 1 Universal Remote Control 2. Insert 2 batteries (AAA alkal

1. Introduction The Marmitek X-10 remote control is designed to control upto 8 devices: TV, VCR, CBL (decoder, set top box), DVD, CD,SAT (satellite re

English3. Function of the remote's buttons [1]XPOWER (On/Off) Allows you to switch off the last selected appliance. Some appliances can also be s

[17] 5 REW (rewind) In VCR, DVD or CD mode: This button works the same way as in your original remote. IN TV mode: Coloured key (Red), control of vide

English4. Programming To make your remote suitable for your own equipment, you have to program it once. You can do this by entering a code, related to

Note: The Letter Code selected must be the same as the Letter Code used by your RFIX35 RF-interface. RF-secured modeIn the RF-secured mode the RF-inte