Marmitek MS845 Manual de usuario descargar pdf (Pagina 4)

MS845 4

Switch 2 Switch 3 Pulse Count

OFF OFF 1

ON OFF 2

ON ON 3

OFF ON Adaptive

Table B.3: Pulse Count Setting (/MS845)

4. Place the Mode jumper over pins 2 & 3 (Radio Mode); the LED flashes.

Install the M

ode jumper only after applying battery power.

From the Progra

mming menu, select Devices, Zones [911].

Select the zone to which you want to register the transmitter; the system

initiates Registration mode. When Save? appears on the panel’s L

displa

y, press 9

Remove the Mode jumper and pla

ce it over one pin for storage.

Choose an appropriate mounting height from Table B.1 and test the

transmitter from the exact mounting position before permanentl

mounting the unit.

Knock out the mounting holes and attach the base to the wa

ll.

10.

Mount the PCB at the required vertical adjustment and replace the PCB

screw

11.

Write the number of the zone on the sticker provided. Affix the sticker

inside the front cover for future reference and replace the front cove

Warm-U

p Time

The detector will need to warm

up for the first 90 seconds after

applying power.

Pulse Counter

The pulse counter determines

the amount of beams that need

to be crossed before the

detector will generate an alarm. To set the pulse

counter, refer to table B.3.

Adaptive Pulse Count

Using the Adaptive pulse count feature, the

detector chooses between 1 or 2 pulses based on

its analysis of the received signal.

Vertical Adjustment

To position the PCB, turn the Easy Lock counter-

clockwise and slide the PCB up or down to the

required setting using the vertical adjustment

scale. The detector’s coverage area is 12m x 12m

when the PCB is positioned at 0. Slide the PCB up

towards the -8 position to decrease the coverage

area bringing the beams closer to the mounting

wall.

Figure B.2: Lens Coverage Diagrams

1 2 3 4 5 6 7 8 9 ... 35 36

Comentarios a estos manuales

Sin comentarios

Marmitek MS845 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Marmitek MS845