Marmitek PROTECTOR 28 Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
Mounting the monitor onto the wall.
x Route the cable to the place where the monitor will hang. (Note:
there must be an outlet nearby).
x Mount the wall plate onto the wall using the four supplied
screws.
x Take the monitor and secure the cable’s 4 U-connectors in the
correct order under the 4 connectors.
x Connect the power adapter with the backside of the monitor.
x Now place the monitor against the wall plate and move it up and
down against the plate such that it snap-locks onto the plate.
x Insert the adapter into the outlet.
x You can always slide off the monitor by sliding it upwards.
x Your DoorGuard 450™ has now been installed successfully and is
ready to use.
© MARMITEK
8
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 67 68

Comentarios a estos manuales

Sin comentarios