Marmitek RC840 Especificaciones descargar pdf (Pagina 33)

4.7.2: Message Center

The ProGuard800 Message Center is designed to allow the user to record a short

message that may be played back later by another user. After a message is recorded,

Message Waiting is displayed on the LCD until the message is played back.

To play back a recorded message:

x From the Service menu, select Messages, Play Message [7021].

To record a message:

1. From the Service menu, select Messages, Record Message [7022].

2. Press 3 to start recording the message.

3. Record your message. The message may be up to twenty seconds

long.

4. Press 3 to stop recording; the message is automatically played back

and OK? is displayed.

5. Press 3 to save your recording.

To delete a message:

1. From the Service menu, select Messages, Delete Message [7023];

OK? is displayed.

2. Press 3; the message is deleted.

The Record and Play options can also be accessed via a convenient shortcut without

needing to enter a valid user code.

To access the Record Message option from Standby mode, press then

To access the Play Message option from Standby mode, press then

4.7.3: Wireless Siren Test

To test the wireless siren:

x From the Service menu, select WL Siren Test [703]; the external siren

is sounded briefly.

4.7.4: Siren Test

To test the control panel’s built-in siren:

x From the Service menu, select Siren Test [704]; the control panel’s

built-in siren is sounded briefly.

4.7.5: Interface Test

The Interface test enables you to check if the speaker, LEDs and LCD are functioning

correctly.

To test the system interface:

x From the Service menu, select Interface Test [705]; a short sequence

of chimes are sounded from the speaker, all LEDs flash and the LCD is

tested on all connected LCD keypads.

ProGuard800™ -33-

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 111 112

Sin comentarios

Marmitek RC840 Especificaciones Pagina 33