Marmitek RC840 Especificaciones descargar pdf (Pagina 43)

6.3.2: SMS Command Format

Each SMS command contains the following elements:

X SMS Command Descriptor (up to 43 characters of free text)

Y # (delimiter – separates the descriptor from the actual command)

Z User Code (4 digits)

[ Command (0=Off, 1=On)

\ Device Number (HA Units: 01-16)

The following example shows the format of an SMS command to switch on a water boiler

controlled by HA unit 8.

YZ[\

Boi l er On#1234108

While the SMS Command Descriptor is optional, you must start the SMS command with

the # symbol for the system to accept the command.

6.3.3: SMS Confirmation Message Format

After an SMS command is executed, the system can return a confirmation SMS

message to the sender. This message includes the HA unit’s descriptor and the

command that was sent. For further information on how to enable this feature, see

10.7.5: SMS Confirmation.

The following example shows the confirmation message the sender receives for the

sample command from the previous section.

BO I L ER - ON

6.4: Scheduling

Scheduling allows you to program the panel to send On/Off commands to HA units at

specific times. You can also program the days of the week that the schedule is active.

6.4.1: On Time

To edit an HA unit’s “On” Time:

1. From the main menu, select HA Schedules [8].

2. Select an HA unit.

3. From the X-10 unit’s sub-menu, select On Time [#1].

4. Enter a time (HH:MM).

5. Press 3 when the desired setting is displayed.

ProGuard800™ -43-

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 111 112

Sin comentarios

Marmitek RC840 Especificaciones Pagina 43